New Zealand Starlet Club

Also this happened
[youtube=]https://www.youtube.com/watch?v=hPcrdI4MYro[/youtube]

And another one
[youtube=]https://www.youtube.com/watch?v=aBnZJhVUDZI[/youtube]

Will update this sometime soon but here's a quick clip from the 2017 Nationals - few seconds of 4agte shown
https://www.youtube.com/watch?v=ToOqbkFApyc

Last Friday was the final round of the drag wars at Meremere so I took the 4agte down for the last runs of the season. Since the last event I finally solved the slight miss/hesitation at high load which turned out to be a caused by the Magnacor spark leads. The 20v head runs leads with a boot that s...

Had the car out again last Friday for the night meet at Meremere. I didn't have any time before the event to make any changes on the car other than swap the side pipe for the full exhaust, so its was the same boost/no vvt tune. While loading it on the trailer noticed an exhaust leak from the turbo a...

The new Cusco RS LSD for the 4agte has turned up - ordered it late last year! Now to find a donor c56 to fit it into. Last photo shows the old TRD unit that died a while back after years of faithful service. https://garage4ag.files.wordpress.com/2016/02/img_3190as.jpg https://garage4ag.files.wordpre...

Over the summer break I didn't do too much to the car other than finally fit the windscreen and roof gutter trims, buy some Hoosiers (first time ever) and fit a new seat in the drivers side. I also changed the alternator belt and made a new adjuster to get a touch more tension on it as it was slippi...

Been a while, pulled the car out and started it recently, few checks and its pretty much ready for the season. Have been crazy busy with working on other peoples cars - check out the facebook page if your interested (in signature below). Few photos https://garage4ag.files.wordpress.com/2015/11/img_2...

Took the heap out for a burn today and to test the new rpm limit settings. Gave it absolute death and it didn't miss a beat - win.

Photo from a few weeks back

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/p180x540/10974262_927846487248992_4760010738441638020_o.jpg https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-xpf1/v/t1.0-9/10984143_691341404310575_1906408095528162030_n.jpg?oh=bc8fc18ddc52cfe148f6454a484cb52a&oe=5594C309&__gda__=14356...

That's pretty cool! Thanks for posting it up. Brad took some photos of the car in the pits as well but didn't think any would make it to the actual speedhunters page.

Found this photo - pretty cool

2015 Nationals over for another year. Pretty average results but a great day out all the same. Got 5 or so runs in before giving up and parking it up - plagued all day with very annoying missfires and a random trigger error which is likely due to the cam angle sensor so will be replacing that and tr...

Ok here is a run from this afternoon - 1st gear through to nearly the top of 4th ~ 7700rpm before backing out (should really try and work out how fast it was) Air temps started at 21 degrees and peaked at 27 degrees which I think is pretty good for a hot day although don't have any other logs to com...

So yeah, this thing is running now. Got it started after some trial and error (errors on my behalf). Got some basic tuning done with the help of my co-pilot KPR and ran it in a bit at 6psi and 8000rpm. Not alot of timing dialed in so there's a bit to go. Did 60kms or so of run in and nothing blew up...

Spam user - will delete

Have cleared the decks a bit with only two projects here now (EP82 and AE92) although a EL31 4efte loom conversion is due to turn up shortly which will tie me up for a day or two. Everyone loves photos so here's a couple of the recent cars: AE111 Blacktop 4agte - Wired in a Link G4 Storm, got runnin...

Lazy picture-less update. Currently balls deep in wiring this bitch - about half way thru so all going well another week and I should be powering up the ecu. Have redone the battery mounting in the boot, feeds via isolator, charge circuit, uprated fuel pump relay/wiring and currently working on the ...

Shit/boring update but still heading in the right direction. Inlet is all on for the final time I hope. Just before I refitted it I took the opportunity to replace the clutch master. Obligatory photo http://www.starletcentral.co.nz/images/Stu/4agte/315%20-%20Clutch%20master.jpg Wasn't going to use t...