New Zealand Starlet Club

Its free and takes 5mins to set up, do it.

Car is going in for some panel & paint today. Getting the boot resprayed due to the usual starlet clear coat pealing, plus getting a small amount of rust on the door taken care of. Also getting the graphics redone as some of it will have to be removed.

Not working for me either. I'm using Chrome

+1, needs to be done.

Update! Finally got around to putting some tyres on the TOM's wheels I got from finx a while back and chuck them on the car. Was after a specific size (185/55R14) as I was after a low sidewall and it also helped to keep the speedo accurate. After doing a bit of browsing around the local tyre shops, ...

UPDATE! Went to Fatman's on Sunday to fit the drive-shaft. Decided to do a write up after a member from the UK starlet forum told me he was doing the same thing and would need some help. First things first, car was jacked up so the wheels could spin freely. http://img522.imageshack.us/img522/1574/p...

mmmmm brand new toyota parts

Ok update on the driveshaft situation, after pricing a brand new EP95 one up from the local toyota dealer and subsequently falling over laughing ( $3330 ), I decided to get one from Mark via TS ($1075)
Should be here in a month.

Right so after finding out its only running fwd on the dyno, I emailed Mark from TS to price up a new drive shaft, and no suprise, the part has been discontinued. So my options are 1. Try and find one second hand 2. Put in a C5* and run it fwd 3. Be an idiot and convert it to rwd using a solid shaft...

Heres some photos the previous owner took. http://img40.imageshack.us/img40/3141/1002097g.jpg http://img223.imageshack.us/img223/4730/1002100.jpg http://img40.imageshack.us/img40/3001/1002099n.jpg Brought it off a lovely old lady who used if for daily driving to the city, till she started taking the...

NAME : William
MODEL : Toyota Starlet EP85 Soleil L 'Memorial'
YEAR : 1993
ENGINE : 4E-FE

UPDATE!
Yay, finally the KP is back on the road since breaking it at the drags in Feb, turns out some of the flywheel bolts sheared off and spun around inside the bellhousing, screwing up the end of the crank in the process. So another 4k was put in and got the radiator leak fixed too.

Thought id make me one of these since ive been here a while so here goes. NAME:William MODEL:KP60 YEAR:1984 ENGINE:4K-E/U (now a 4K-U) 4K-U engine K50 5 speed box Ramflo filter Headers Standard seats recovered in leather Cheap sports steering wheel No carpet No heater or air con Some hard but high s...

Sounds like a wicked idea, you could also have ones for biggest tacho, most curbed wheels , most sleeper starlet etc..